Hornady Lock-N-Load
Auto Progressive EZject Press NZ$1,570 (incl. GST)
Model # 095100
The Lock-N-Load® AP™ with NEW EZject™ system loads at a rate of up to 500 rounds per hour, and features the quickest change-over of any progressive press.
The Lock-N-Load® AP™ is a professional-grade, auto-indexing, 5-station progressive press that features Our patented Lock-N-Load® bushing system as well as a host of other features -- detailed below --that make it much more attractive than other, more expensive presses, such as the Dillon XL650.
An
automatic, five-station press, Hornady’s Lock-N-Load AP™ lets
us switch dies, powder dies, check dies, bullet seaters or
crimp dies without changing the whole die head. Change one
die or all with one quick twist. The Lock-N-Load AP comes
complete with everything listed here, as well as extra bushings.
FEATURES INCLUDE:
LOCK-N-LOAD POWDER MEASURE
The only system that uses a full size powder measure that
can be reset to another charge or powder with the push of
a button. The unique inserts can be preset to the charge you
use with the caliber you are loading. The most flexible (and
economical) powder system available for progressive presses.
PRIMING SYSTEM
The primer slide in the shell carrier receives a primer at
the top of the stroke and inserts in the case at the bottom
of the stroke. The slide stays in perfect alignment, and is
easily changed from large to small. Use the included primer
pick-up tubes (large and small) to fill the primer tube.
LOCK-N-LOAD BUSHING SYSTEM
Switch dies from one caliber to another or change out die
stations and begin reloading again in seconds. Once set, dies
never needs readjusting. Bushing locks standard 7/8"-14 dies
rock-solid in perfect alignment. |
|
CASE ACTIVATED POWDER DROP
Get a charge of powder only when a cartridge is in place.
Works with any cartridge, pistol to magnum rifle. Can be manually
operated to check powder charge. Install the optional Lock-N-Load
powder die for the fastest changeover of all progressive presses.
Also fits RCBS measurer.
FIVE-STATION DIE PLATFORM
Five stations allow for all the variables and still let you
use your standard dies — most 7/8"-14 dies and 7/8"-14 powder
measures will work.
UNIVERSAL EJECTOR
Cases are automatically ejected into the included case catcher.
AUTOMATIC INDEXING
This very important feature automatically advances shells
to the next station with the smoothest indexing of any press
in this price range, and rotates every half stroke to lessen
the chance of powder spillage.
CASE RETAINER
Quickly and easily remove and/or replace a case from the shell
plate at any point in the cycle without extra retaining buttons.
Case retainer fits all calibers.
LARGE CARTRIDGE CATCHER
A large capacity catcher comes standard with the L-N-L AP
Press. An extra large capacity catcher which holds up to 1/3
more completed cartridges is available as an option.
*Note: Some manufacturers taper crimp dies may interfere
with the ejector wire when they are used in station 5. Hornady
New Dimension Taper Crimp Dies are designed to work flawlessly
in station 5. If you will be using dies other than Hornady,
we suggest that you use our powder through expander and install
the taper crimp die in the 4th station. Ejector wires are
set at the factory and we DO NOT RECOMMEND adjustment.
*Note: Shell plates have been re-designed for case
ejection. We added a chamfer that allows cases to move easily
in and out of the shell plate. |
