Model # 9991
Weight: 0.63 lbs
Material: Aerosol non-petroleum wax
Featured Technology: DynaGlide Plus (see below for further information)

Hornady One Shot Case Lube is the most popular reloading cartridge and tool lubricant in the market, because; Case Lube is a dry film “Boundary” lubricant that is non-hazardous, does not contaminate powders or primers, and the “DynaGlide”™ technology exceeds US Military & NATO load carrying capacity requirements by 6 times. Precision shooters appreciate One Shot Case Lube’s clean, non-sticky, quick and easy application when loading large volumes of rounds at a time. The flexible all-purpose dry film lubricant use on their other reloading tools is a major bonus. Lube entire blocks of cases in one shot.  Dries in minutes. One Shot is a non-petroleum product that will not contaminate powder or primers.

About DynaGlide Plus®:

DynaGlide® - Micro-Layered, Dry Dual-boundary (6 layer)-Films Lubricants are self-leveling, non-gumming, high pressure resistant, proprietary lubricants. The new DynaGlide Plus® - Micro-Layered, Dry Tri-bondary (9 layer)-Films Lubricant referred to in this document are also classified as “Boundary” lubricants and are ideally suite to the firearm industry due to their exceptional performance under high pressure, high heat conditions and extreme environmental exposures. The DynaGlide Plus® Lubricant is known for its stability and non-migrating features that will stay where applied. DynaGlide® Lubricant has been made available to the shooting industry exclusively by the Hornady Company since 1986.

DynaGlide Plus® Lubricant exceeds the current military specifications for lubricants by over six times. These micro-thin film lubricants are unrivaled in their ability to defend against dust, grit, powder residues, gunky foreign matter and stay fully functional in extreme cold conditions below -40 degrees and above 400 degrees Fahrenheit. Through the use of additional proprietary film additives DynaGlide® Lubricant has extended the protective and self maintaining capacities as well as the effects of it’s various film products to address environments of rapid and frequent changes in humidity, condensation and moisture, variable temperature, atmospheric pressures, surface load pressures and extreme heat.

DynaGlide Plus® Lubricant performance characteristics directly address the major breech/leade issues that take place during and after the millisecond of bullet ignition. These breech/leade issues and the resulting firing actions taking place can and do affect the speed/accuracy of the firearm and the velocity/action of the projectile.

DynaGlide Plus® Lubricant conditions the firearm as it dries (within two to three minutes of application) and does not create or contribute to conditions that result in powder residue gunk buildup and the attraction of environmental or chemical pollutants. Conversely traditional wet solvent cleaners, lubricating oils and silicone lubricants significantly accelerates fouling, gumming and gunking. Additionally wet cleaning solvents residually weaken lubricating oil viscosities which directly contribute to carbon buildup and its abrasive effects. DynaGlide Plus® Lubricant performance is most significantly realized during extended firearm use and or high numbers of rounds fired, with a self cleaning characteristic that sheds debris and pollutants through “blow out” via the firearm barrel and gas ports with each round fired. DynaGlide Plus® Lubricant resists leading build-up at the microscopic level and all but eliminate the need to use toxic cleaning solvents and wire brushes. Major cleaning cycles are considerably less frequent, difficult and time consuming.

DynaGlide Plus® Lubricant technologies have effectively created a new paradigm in firearm cleaning and maintenance, one that emphasizes easy and quick firearm pre-conditioning with maintenance “touch up” as needed, rather than traditional (post-shootings session) firearm cleaning that is “messy”, time consuming and labor intensive. If the firearm has been sufficiently pre-conditioned as per DynaGlide Plus® Lubricant directions, reconditioning and clearing the firearm after shooting can quickly and easily be achieved by running a gun patch down the firearm barrel, wipe-down with a clean rag and the firearm is ready for storage.

The proprietary ingredients in the DynaGlide Plus® Lubricant technologies are non-toxic, do not contaminate the environment and do not migrate into gun powders and primers. (Many of todays lubricants are formulated with Silicone which do migrate). DynaGlide Plus® Micro-Layered Dry-Boundary Films Lubricant technologies address important environmental concerns and help to set a standard for new products that satisfy user preference and emerging governmental codes and compliance regulations (foreign and domestic). DynaGlide Plus® Lubricant technologies do not include any Teflon which have been found to cause wear and may be toxic.

Benefits:
DynaGlide Plus® Micro-Layered, Dry Boundary Films Conditioners/Lubricants offer the firearm owner a powerful way to keep a firearm in pristine condition through a broad spectrum of protective, and time/labor saving benefits.

With DynaGlide Plus® preconditioning a firearm (as a preventative to fouling and wear) is more efficient than “after the fact” traditional, abrasive, messy and labor intensive cleaning.

DynaGlide® has engineered Co-polymers and Block-polymer technologies into highly efficient Micro-Layered, Tri-Boundary Dry-Films lubricant that has the unique characteristic of being self-cleaning. These new Micro-Layered, Tri-Boundary Dry-Films lubricants have revolutionized the materials and techniques involved in firearms cleaning and maintenance.

Micro-Layered, Tri-Boundary Dry-Films lubricants provide; 1) high load carrying lubrication to resist (heat, metal to metal pressures and wear), 2) temperature reactive corrosion, and chemicals resistance (rust, corrosion and tarnishing), 3) chemical to chemical contamination resistance (environmental, and external contamination).

Suggested Uses:
After an initial DynaGlide Plus® preconditioning or reconditioning session apply DynaGlide Plus® Lubricant into ejector, breach and gas port areas before shooting to establish, control and maintain a debris and foul free environment within your firearm. Use enough DynaGlide Plus® formula to flush and displace debris from trapping areas.

To Maintain the Micro-Layered Tri-Boundry* Dry-Film effect apply DynaGlide Plus®...
* every 10-20 rounds for lead bullets.
* every 20-40 rounds for jacketed bullets.
* wipe down firearm as needed.
* No after shooting clean-up necessary.

Hornady Reloading

Stay Loaded: Reloading provides the ability for shooters to customize loads for individual firearms; it’s an excellent past time, and often offsets much of the cost of shooting by reusing the most expensive component of ammunition – the cartridge case. Not only do handloaders maintain control of the ammunition assembling process, but there’s an overwhelming feeling of self satisfaction when you knock over that plate, hammer the X ring or drop that buck of a lifetime with ammunition that you handloaded.

Lock-N-Load®: Reloading is all about control. The patented Hornady® Lock-N-Load technology offers complete control, allowing you to change dies and begin loading another caliber in seconds.

Eliminate Hassle: The Hornady Lock-N-Load system features quick tool change technology that allows you to switch rifle and pistol dies, powder dies, check dies, bullet seaters or crimp dies without having to change the whole die head. This unique technology is featured on our Lock-N-Load Classic and Lock-N-Load AP presses. In addition, Hornady conversion bushings can convert other brands to the Lock-N-Load system.

Get In the Zone: The complete line of Hornady powder measures, dies, precision gauges and reloading accessories are at your fingertips in the Hornady Reloading RedZone.

About Hornady

"Ten bullets through one hole" was the philosophy of Joyce Hornady, the company's founder. This great idea of accuracy and perfection has continued from the first bullet made more than sixty years ago, right through today.

Like so many successful companies, Hornady Manufacturing was born out of one man's vision of a better product for his own use. Joyce Hornady was an avid shooter and needed a steady supply of good, accurate bullets. While commercially available bullets were usable, Joyce felt that better bullets could be made.

Hornady is now one of the largest independent producers of bullets in the World. Hornady sell bullets as separate components, loaded in Hornady Ammunition, and also to other ammunition companies to be loaded in their premium grade ammo.

The stature of Hornady Manufacturing Company within its industry has never been higher. Combine the best customer base with the best employees, throw in the family/management team running this business; it's hard not to be successful.

Quality. Continuous improvement. Innovation. Responsiveness. Looking to the future, it appears that the Hornady heritage and the Hornady vision will continue to shine brightly.