All prices are in New Zealand Dollars with 15% GST included.
Overseas customers are not liable for GST, divide NZ$ by 1.15 and then use the below Currency Converter:



 
 

Gunsmithing Tools     


  Gunsmithing Screwdrivers and Tools:   Checkering Tools / Bedding Compounds / Oils:
Wheeler Engineering Tools Acraglas Bedding Compounds
Picquic Screwdrivers Dembart Checkering Tools
Winchester Gunsmithing Sets Dembart Oils and Wax
Laser Bore Sighters Birchwood Casey Oil
Lyman Trigger Pull Gauge    

 

Bedding Compounds
Brownells - Accurize Acraglas Gel 4 oz. Kit NZ$89 (incl. GST)
Quantity:
For bedding, inletting, repairing, accurizing and strengthening. Butter-smooth, stays put, easy to use on all stocks.

Super New Acraglas, Nylon Epoxy Derivative, Butter-Smooth Consistency, Mixes With Atomized Metals.

Contains:

* 2 fl. oz. (59 ml) Resin
* 2 fl. oz. (59 ml) Hardener
* 7/8 fl. oz. (26 ml) Release Agent
* Measuring Spoon
* Re-useable Poly Mixing Dish
* Mixing Stick
* Brown Dye
* Black Dye and
* Complete Instructions.
 

 


Dem-Bart - Checkering Tools
Dem-Bart Checkering Kits
Dem-Bart Starter Checkering Kit  NZ$116 (incl. GST)
Size : Quantity:
* 3 Tools and 3 extra cutters  
* Contains tools: S-1, C-1 & a style 2 tool in lines per inch and replacement cutters B- 1, F-1, and style 4 cutter in lines per inch specified.
* Kit comes in either 16, 18, 20, 22 or 24  lines per inch.

* This is an excellent choice for beginning carvers and craftsmen.
 

     
Dem-Bart Master Checkering Kit  NZ$158 (incl. GST)
Size: Quantity:
* 6 Tools 
*
The Master Set contains complete tools in C-1, F-1, S-1 and #2, #3 and #4 tools in the lines per inch specified.  All tools are complete and no replacement cutters are included in the Kit.
* Kits come in either 16, 18, 20, 22 or 24 
lines per inch.
 
     
Dem-Bart No. 1 Replacement Cutters

Dem-Bart No. 1 Fine Cutter NZ$15 (incl. GST)

Quantity:

Dem-Bart No. 1 Coarse Cutter NZ$15 (incl. GST)

Quantity:

Used for making the original layout or pattern and to deepen the rows after they are marked in with the spacing tools described below.   It is "V" shaped with teeth on both sides or the "V".

 
     
Dem-Bart No. 2 Replacement Cutters

Dem-Bart No. 2 Cutter NZ$15 (incl. GST)
* Sizes: 16, 18, 20, 22, 24, 28 and 32

Size: Quantity:
Used for marking the rows and for deepening the rows after they are marked.  One blade follows a guide line while the other blade marks the row.  Then this tool is moved to the next row it deepens it and again marks the next row.  This tool is a combination spacer and deepening tool.  Both blades are cutters.
 
     
Dem-Bart No. 3 Replacement Cutters

 

Dem-Bart No. 3 Cutter NZ$15 (incl. GST)
* Sizes: 16, 18, 20, 22 and 24

Size: Quantity:

A left hand spacing tool which has two blades.   The right hand blade does not have teeth, instead it is sharp and smooth and will follow a fine guide line.  The left hand blade has teeth and cuts the new row as the checkering progresses from the right to the left.  Due to the sharp narrow guide blade it is possible to produce very straight rows and consequently exceedingly precise checkering.

 

     
Dem-Bart No. 4 Replacement Cutters

Dem-Bart No. 4 Cutter NZ$15 (incl. GST)
* Sizes: 16, 18, 20, 22 and 24

Size: Quantity:
Identical to No. 3, except that the right hand blade is the cutting blade.
 
     
Dem-Bart No. B Replacement Cutters


A wide bordering tool which is used to put the final boarder around the layout or pattern.

Dem-Bart No. B-1 - Wide Cutter NZ$15 (incl. GST)

Quantity:

A narrow bordering tool which is used to put the final boarder around the layout or pattern.

Dem-Bart No. B-2 - Narrow Cutter NZ$15 (incl. GST)

Quantity:
 

     
Dem-Bart No. S-1 Replacement Cutters and Tools


Dem-Bart No. S-1 Cutter NZ$15 (incl. GST)

Quantity:
 


Dem-Bart No. S-1 Tool NZ$26 (incl. GST)
* For tight corners

Quantity:
     
Dem-Bart Skip Line Replacement Cutters

Dem-Bart Skip Line Cutter - Left Hand NZ$18 (incl. GST)
* Sizes: L9, L10, L11 and L12 
Size: Quantity:

Dem-Bart Skip Line Cutter - Right Hand NZ$18 (incl. GST)
* Sizes: R9, R10, R11 and R12 

Size: Quantity:
 
     
Dem-Bart Triple Line Replacement Cutters

Dem-Bart Triple Line Cutter NZ$18 (incl. GST)
* Sizes: T16, T18, T22, T24 and T26

Size: Quantity:
Used after pattern layout to let down or deepen the diamonds prior to final polish.  This cutter has an equalizing effect on the lines per inch to assure an even pattern.
 
     
     
Other Dem-Bart Tools and Products


Dem-Bart Instruction Booklet NZ$18 (incl. GST)
* Fundamentals of Gunstock Checkering

Quantity:

By Master Stockmaker, Bill McGuire. 13 pages, 5½" x 8½". Softbound. An introduction to checkering for the beginner. Explains each tool's function, guides you in selecting, using them correctly. Shows how to lay out a pattern and finish a checkering job. 34 drawings.

 
     

Dem-Bart Veiner NZ$53 (incl. GST)
* Available in 60 or 90 degrees

Degrees: Quantity:

Short, compact veiner puts you closer to your work for firm, no-slip control and all-angle maneuverability when making curved lines, fleur-de-lis or any border work. Perfect for diamond cleanup at border junctions. Tool-steel, V-shaped shaft is curved upward to increase cutting efficiency. Takes and holds sharp edge. Palm-sized handle feels natural…in fact, we couldn't put it down until we'd carved on every piece of good scrap wood in sight!

 


     

Dem-Bart Regular Handle and Shank NZ$18 (incl. GST)

Quantity:

Handle fits all Dem-Bart cutters except the short pointer (S-1). Features ergonomic round wooden handle for comfort. NB: Doesn't come with a cutter.

 

     

Dem-Bart Layout Guide / Butt Scribe NZ$25 (incl. GST)

Quantity:

Used to make sure that the checkering pattern is parallel to top line of the forend. Features a fully adjustable marking quill to check both top and bottom lines of the pattern.

 
     
Dem-Bart Stock Oils

Dem-Bart Continental Style Stock and Checkering Oil - 2oz NZ$18 (incl. GST)

Quantity:

Continental Style Stock & Checker Oil is a superior waterproof oil finish for the professional stock finisher and the meticulous hobbyist.  Seals and hardens the wood with a low sheen, London type finish.   Also appropriate for application on other wood products.

 
     

Dem-Bart Continental Style Stock and Checkering Oil - 8oz NZ$43 (incl. GST)

Quantity:

Continental Style Stock & Checker Oil is a superior waterproof oil finish for the professional stock finisher and the meticulous hobbyist.  Seals and hardens the wood with a low sheen, London type finish.   Also appropriate for application on other wood products.

 
     


Dem-Bart Waxylene Gun Stock Wax - 2oz NZ$21 (incl. GST)

Quantity:

Waxylene Gun Stock Wax is applied as a protective finish of gunstock wood and pistol grips.  It is easy to apply over the Dem-Bart Oil and gives a waterproof surface, which will not water spot not show finger marks.  Polish over your checkering pattern with a soft tooth brush to clean and protect the checkering.  Waxylene buffs out with a beautiful sheen. 

 

 

 

Birchwood Casey Oil
Birchwood Casey - Tru-Oil NZ$14 (incl. GST)
Quantity:

* 3 Fl Oz  (90ml) 
* Gun Stock Finish

There is no better oil finish! Tru-Oil® Gun Stock Finish has been the professional’s choice for gunstock finishing for more than 30 years. Its unique blend of linseed and other natural oils dries fast, resists water damage and will not cloud, yellow or crack with age. Excellent as a sealer for under butt plates, recoil pads and in inletted actions to prevent stock damage.

 


 

                

Copyright © 1998-2017 Hunting and Outdoor Supplies.  All Rights Reserved.
Updated March 2017