Lee Single Stage Reloading Presses |
|
|
|
Lee Breech
Lock Challenger Press NZ$195 (incl. GST)
Model: LEE90588
The "O" frame press by design is the strongest and by far the most
popular style press. The larger than average opening allows for
maximum hand clearance. The spent primer catcher is positive and
allows you to route the spent primers directly to the trash can.
Priming is a dream with the Lee Lever Prime System. Best of all,
it includes the Breech Lock Quick Change die system. Change dies
instantly with a twist of the wrist, and you never have to re-adjust
your die. Other features include all steel linkage with adjustable
length lever. Comes with one bushing.
Additional Features: Comes with one quick change bushing
Warranty: Lee 2 Year Unconditional Warranty |
|
|
|
|
|
Lee Breech Lock Reloader
Press
An outstanding value. Exclusive balanced lever that can't drop down
to pinch your fingers. Unlimited hand clearance that only a "C"
frame can offer. Works equally well with the right or left hand.
Even if you already own a press, an extra press is always useful
for decapping, bullet seating or bullet sizing.
Lee Reloader Press NZ$91 (incl. GST)
Model: LEE90045
Lee Reloader Press and Manual NZ$110 (incl. GST)
Model: LEE90700 |
|
|
|
|
|
Lee The
Classic Cast Press NZ$415 (incl. GST)
Model: LEE90998
Largest opening in the industry and the longest stroke, yet the
handle is adjustable to provide the least handle travel of any press.
Rigid cast iron construction in a classic "O" design for
maximum strength. Baked powder coating is durable and makes the
Classic Cast a handsome addition to any reloading bench.
Adjustable handle is movable from right to left. The start and stop
position is adjustable with a 48 tooth ratchet type handle clamp.
In addition, the handle length is completely adjustable. Shorten
when you're loading handgun and short rifle cases.
Large flat cored base with 3 mounting holes mounts solid to any
bench.
Automatic primer arm with bottom of stroke priming for best feel.
Includes two primer arms for large and small primers. No more fumbling
with tiny guides and springs.
Largest 1 1/8 diameter hollow ram to catch every primer with hose
fitting to allow primer disposal directly to a trash can Supported
by over 12 square inches of ram bearing surface.
Threaded die adapter accepts standard 7/8 - 14 dies, remove and
the press accepts 1 1/4 - 12 large series dies.
Powerful compound linkage with positive travel stops prevents toggle
or "cam over."
Accepts standard shell holders, ram insert can be rotated to allow
primer installation on right or left side. |
|
|
| |
|
|
Lee Turret Reloading Presses |
|
|
|
|
Lee 4 Hole Turret
Press with Auto Index NZ$250 (incl. GST)
Model: LEE90932
Compound leverage is a proven design. This turret design has no spring. The turret is secured by large rifle bolt lugs in a strong steel ring. The lugs are placed on the circumference in a patented form to prevent tipping. The coupling is so strong that even the largest magnum cases may be easily sized. Because the amount of effort required is so low, a hefty bench is not required. The Lee Turret Press features a primer catcher built in, as well as a longer stroke, increased hand clearance, and a nice wood handle. Why pay extra for something less if you don't need all of these features? Even if you currently own a more expensive press, you'll want a Lee Turret Press.
You can put your Lee Factory Crimp Die or Taper Crimp Die in the press through the fourth hole in the turret.
The auto index feature on the Value Turret Press allows you to load cartridges with an overall length of 2.313" or less, while the auto index feature on our Classic Turret Press allows you to load cartridges with an overall length of 3.313" or less. Anything longer than the above specifications would require the turret to be manually advanced on both presses.
Note: Handle has a slight bend to it that is not apparent in the image
|
|
|
| |
|
|
Shotgun Shell Reloading Presses |
|
| |
|
|
Lee
Load-All II Shotshell Reloading Press
NZ$168 (incl. GST)
Model: LEE90011/12/15
With the Lee
Load-All II shotshell press, you can load just as fast as with any
other brand of loader costing up to $200!
Included with this great price are 24 shot and powder bushings which
alone can cost several dollars each.
Written 2-year unconditional guarantee and a lifetime warranty!
Primer feed accessory available.
|
|
|
| |
|
|
|
|
| |
|
|
Lee Load-All II Shotshell Press Accessories
Lee Conversion Kit to Another Gauge NZ$51 (incl. GST)
12Ga LEE90070
16Ga LEE90071
20Ga LEE90072
Lee Shot & Powder Bushings in Plastic Storage Box - Set of 24 NZ$40 (incl. GST)
|
|
Lee Breech Lock Press Accessories
Lee Breech Lock Quick Change Bushings - Pack of 2 NZ$25 (incl. GST)
* Model # 90600
The LeeBreech Lock system allows reloaders to quickly and easily change dies in seconds. Dies fit inside of the bushing, which allows them to be quickly installed and removed from the press leaving the die setting intact for the next reloading session. This saves valuable time setting up, and the hassle of resetting your dies during each reloading session.
Lee Primer Feeds
Lee Primer Feed Small
NZ$51 (incl. GST)
Lee Primer Feed Large NZ$51 (incl. GST)
|
| |
|
|
Lee Adjustable Shot Dipper NZ$12 (incl. GST)
Model # 90973
The Lee adjustable shot dipper is a great tool for reloaders looking for tool to help load shotshells by hand in small batches. This tool accurately measures lead, Bismuth, steel shot, tungsten, hevi-shot and any other shot that you could think of filling the cavity with. The telescoping cup adjusts from 7/8 to 1-7/8 oz and is calibrated for lead shot. It works perfect for large pellet sizes. |
|
Lee Turret Accessories
4 and 5 hole for quick caliber changeover on Turret Press, Pro 1000
and Load Master
 Lee 4
Hole Turret NZ$28 (incl. GST)
Lee 5 Hole Turret NZ$33 (incl. GST)
The Lee Turret Press is a proven design utilizing replaceable turrets that lock into a solid steel ring. One of the best features is the ability to simply lift out an entire turret and replace it with the another turret setup to load a different caliber. These extra turrets give reloaders the ability to have all of their different calibers on a different turret ready to load. |
| |
|
|
Lee Loader |
|
|
|
Lee The
Classic Lee Loader NZ$78 (incl. GST)
You owe it
to yourself to own and try one of these famous tools. This was
the first complete reloading kit ever offered. Millions upon millions
of rounds have been reloaded with the famous Lee Loader. The perfect
tool for those who wish to simply try reloading because it will
pay for itself in just an hour or two.
Everything
you need to begin loading one caliber. Accuracy is better than
most tools because it only sizes the case neck. Guiness World
record holder for over seven years.
|
|
|
| |
|
|
